Expert Shoe Care With Nick V.

Nick with some very nice shoes (although I spy a stray Ugg)

Nick V., owner of esteemed shoe repair outfit B. Nelson Shoes, NYC, knows his stitch. And his welts, and his vamps from his throats. He knows shoes. He takes abused, worn-out kicks and recrafts and resoles them–rehabilitates them. In an ongoing series, Nick will be answering some of my questions to help you treat your footwear better.


Pete asks: What’s the number one most important step a guy can take to keep his shoes looking better, longer?

Nick answers:

Actually, there’s two equally important steps, waterproof/polish and use shoes trees:

WATERPROOF AND POLISH: Apply two light coats of waterproofing to your shoes. Meltonian Water and Stain Protector is an easy product to find and very effective. It’s essential to use a non-silicone waterproof treatment on dress-wear, because silicone is oil-based. The oil can darken leathers. It tends to pick up dust and dirt. It also might not mix well with conditioners and polishes you may want to use in the future.

Polish and condition your shoes regularly.

USE SHOE TREES: Make sure that you have a pair of cedar shoe trees, AND USE THEM REGULARLY! Regardless of whether or not you think your feet perspire… they do. Cedar is a dry wood that absorbs even the slightest moisture. Insert them when the shoes are new and immediately after each wear. This will prevent any moisture from settling into the lining of your shoes. Moisture will cause decay of the leather.

In addition to keeping the liners dry, shoe trees help to maintain the original shape of the shoe. They also reduce the prospect of deep creases forming on the uppers caused by normal wear. The split-toe, claw-back style offers even tension vertically and horizontally. They are easy to install and remove. Leave the trees in the shoes until you are ready to wear them again.

The following two tabs change content below.